• Materials plate
• Fluid plate
• Equipment plate
• Equipment Application Plate

• Hydraulic hose
• Industrial hoses
• Oil drilling hoses
• Rubber and plastic sealing products

Hydraulic hose

• 
  Data Center Liquid Cooling Hose Special Topic

  Semiconductor equipment liquid cooling solution applied to the Flex10K-L domestic high-channel LCD Driver test machine project
  Inner layer：Black EPDM synthetic rubber

  Reinforcement：One or two layers of synthetic fiber braided reinforcement

  Outer adhesive layer：Black Weather-resistant, ozone-resistant, UL94 V0 flame-retardant special synthetic rubber

  Temperature range：-40℃~+120℃（-40℉~+248℉）

• 
  Super Artery Hose

  • Softness:Low-temperature bending performance: under -40°C testing conditions, the bending radius is reduced by 50% compared to the DIN EN853 standard; the bending radius of the 1″ 42MPa Super Artery low-bending series hose is approximately 250mm.
  • Impulse performance:press tested with impulses at 1.33 times the working pressure, exceeding 1 million impulse cycles performance.
    
  • Abrasion resistance:The ultra-wear-resistant outer layer shows zero wear in testing.
• 
  Long-life Excavator Hose

  • Softness:Low-temperature bending performance: under -40°C testing conditions, the bending radius is reduced by 50% compared to the DIN EN853 standard; the bending radius of the 1” 42MPa Super Artery low-bending series hose is approximately 250mm.
  • Impulse performance:Tested with impulses at 1.33 times the working pressure, performance exceeds 1 million impulse cycles.
    
  • Abrasion resistance:The ultra-wear-resistant outer layer shows zero wear in testing.
• 
  Long-life Mining Hose Assembly

  • Low Bending: Bending radius is 34% lower than ISO 18752 Class C standard
  • High Pressure: Pressure is 25% higher than SAE/DIN standard
    
  • Long Life: Hose impulse count exceeds 1 million cycles
• 
  Building Hydraulic Textured Architectural Design

  High-pressure water roughening directly breaks down the smooth surface of the concrete wall, creating a rough surface that allows cement mortar and tile adhesive to penetrate the wall more thoroughly, increasing the contact area. It also removes release agents, loose dust, and other potential hazards, thus significantly improving adhesion and fundamentally solving the problem of hollow areas.

• 
  Ultra-High Pressure Cleaning Hose

  • Ultra-high pressure resistant:  working pressure 100MPa-400MPa
  • Hose size:diameter 4mm-32mm
  • Applications: Suitable for conveying media such as water and hydraulic oil under high pressure, widely used in high-pressure spraying, high-pressure cleaning, sandblasting, construction machinery, agricultural and forestry machinery, petrochemical and other industries.
• 
  Concrete Demolition

  High-pressure water jet technology, also known as hydraulic demolition and removal technology, refers to the general term for techniques that use high-pressure water jets to remove deteriorated concrete, roughen concrete surfaces, and clean adhering substances. This technology has the advantages of not generating severe vibration, not causing stress diffusion, not damaging the reinforcing steel structure, being able to break up layers to any depth, being environmentally friendly, and energy-saving. It is particularly suitable for the maintenance, reinforcement, and renovation of bridges, dams, tunnels, docks, airports, and important buildings.